PDA

View Full Version : Hello all, Stewart from England here, long time 59 owner.



Batterseaboys
03-11-2011, 04:07 AM
I have a question for a recommendation for the best, most authentic trunk liner.

I'm sure some I've seen don't have the original pattern on them.

I do want the original Burtex one.

Any thoughts greatly received.

Thanks,



Stewart

skeehorse
03-11-2011, 10:18 AM
Hi Stewart
I think the best that I have seen are sold by Jerry Miller You can get his information online.
Good Luck Jim
http://www.jerrysclassiccars.com/

Batterseaboys
03-12-2011, 02:06 AM
Thanks Jim,

Do you know if Jerry's are Burtex?

I also looked at the ones from the Ford Parts Store in Bryan, Ohio - they list two types, a replacement and the original Burtex (I assume Burtex is the kind of wadding on the matting.)

I have to double check but Jerry's are listed as marked but not cut whereas the FPS list's them as 'laser cut'.

I'd like to get a bit of input from guys that have seen/tried both sets.

I also have a question regarding the size of the shipping box they come in!

Thanks for your reply.

Best regards,




Stewart

skeehorse
03-13-2011, 10:50 AM
Hi Stewart
The trunk liner kit is offered precut in burtex from both venders you could email Toby Gorny at Ford parts store here is his email
fordpart@bright.net to check on shipping box.
Good Luck JIm