Ed Bartos
05-09-2011, 04:41 PM
For some reason two wires broke loose on this switch. I cannot determine the colors so I wonder if anyone can help by telling me where they connect.
If looking at the A switch with the plunger at the bottom of the picture, That would expose four connections on the front of the switch and the four short wires (about 6'' long) lead to a disconnect which consists of one female fitting and three male fittings.
1. At the top of the wires, where the disconnect is, the wire to the far right would be the female and would connect to the lower right connection on front of switch
2. Moving to the left, the first male connection, that wire is loose
3. Moving to the left, the second male, that wire is loose also.
4. The last male connector is connected to the lower left connection on the switch.
Can anyone tell me just exactly how these wires are connected on the front of the switch. These are all solder joints but unfortunately, the two are broke loose.
If looking at the A switch with the plunger at the bottom of the picture, That would expose four connections on the front of the switch and the four short wires (about 6'' long) lead to a disconnect which consists of one female fitting and three male fittings.
1. At the top of the wires, where the disconnect is, the wire to the far right would be the female and would connect to the lower right connection on front of switch
2. Moving to the left, the first male connection, that wire is loose
3. Moving to the left, the second male, that wire is loose also.
4. The last male connector is connected to the lower left connection on the switch.
Can anyone tell me just exactly how these wires are connected on the front of the switch. These are all solder joints but unfortunately, the two are broke loose.