Carbureator, Intake Manifold and Exhaust Manifold for 1959 Ford with 352 engine

[Finster]

Hi,
I have a 1959 Skyliner with a 352 engine that runs great. I am looking to replace my 2 barrel intake manifold and carb with a 4 barrel.

I was trying to figure out what production stamps I should be looking for on the manifld and carb and if anyone has a manifold for sale. My questions are as follows:
1. I have the 4 barrel carb that came off the engine and I would like to know
if this is an original carb (stamp is 5752309) for a 1959 Ford 352.
2. I need to purchase an intake manifold for the 4 barrel carb. I was thinking the
stamp for the carb should begin with either B9AE....... or 575..... Does anyone
know if this is correct? Does anyone have one for sale?
3. Do I need to do anything with the exhaust manifold if I make the changes above???

Your help and guidance is would be appreciated.
Thanks,
Robert

[Dave Owens]

Robert,

My 4 barrel intake manifold has the numbers 5750034.

Dave

[Finster]

Thanks Dave. Looks like you are the only other person posting on this bulletin board so far. Hopefully it will catch on and be used as a great source of data.
Robert


Robert,

My 4 barrel intake manifold has the numbers 5750034.

Dave

[59fairlane]

Robert,
I changed my 332 from a 2 barrel to a 4 barrel intake manifold & it runs great. As far as the exhaust manifolds, nothing changed.
Bob.

[homerd43]

Hi,
I have a 1959 Skyliner with a 352 engine that runs great. I am looking to replace my 2 barrel intake manifold and carb with a 4 barrel.

I was trying to figure out what production stamps I should be looking for on the manifld and carb and if anyone has a manifold for sale. My questions are as follows:
1. I have the 4 barrel carb that came off the engine and I would like to know
if this is an original carb (stamp is 5752309) for a 1959 Ford 352.
2. I need to purchase an intake manifold for the 4 barrel carb. I was thinking the
stamp for the carb should begin with either B9AE....... or 575..... Does anyone
know if this is correct? Does anyone have one for sale?
3. Do I need to do anything with the exhaust manifold if I make the changes above???

Your help and guidance is would be appreciated.
Thanks,
Robert

The carb that originally came on the 1959 Ford 352CI was an Autolite 4100 4 bbl.

[Finster]

Would anyone know where to find a spacer plate for a 1959 352 4 barrell carb. This is the plate that goes between the carb and the intake manifold......In addition to the gaskets of course. The spacer plate I had is cracked.....These plates are pretty fragile.
Thanks

[Dave Owens]

Concours parts sells them.

[Joe Johnston]

I have a 4 bbl intake that might will work for you. Will sell cheap but at about 80lbs shipping will be quite a bit if you are far from northwest Ohio. The numbers will probably not match what you are looking for, but the intake should work fine. Also have what I believe to be a 58 short block available. The parts are left from an engine replacement. If interested in pictures and info contact: not4winter@yahoo.com Thanks. Joe

[WILLS RESTORATIONS]

Robert,
i have both a 58-59 4v intake manifold and a 60 4v. Either is for sale i can also check for the carb if you wish.
Bill

[Finster]

Thanks for the offer but I found one in Texas. I will check with some local buddies who are always looking for parts. If they have a need I will let you know.
Rob

[mambeaux]

Robert,
i have both a 58-59 4v intake manifold and a 60 4v. Either is for sale i can also check for the carb if you wish.
Bill

Mr. Wills,

I am interested in an intake manifold and a possible carb. You may contact me at wshkspr at hotmail and you know the rest. I have a 59 Galaxie 500. Let me know if it is still available.

Tony E. Medlin
Baton Rouge
225.362.7640