I have had problems with my top not starting back after unlocking but if I raise it up about 6", by directly running the top motor for a short time, the cycle will go ahead and finish. On erecting the top, it works fine but the right back roof lock continues to run until the deck lid is locked and I release the switch.

I checked the switch and noted that the schematic in the manual shows the two upper contacts are connected when the plunger is in and the bottom two when the plunger is out. On my switch, the upper and lower contacts work together and the middle two contacts work together . Is this a problem or as someone told me, this is a switch for a 59 which he said has some electrical differences in the top workings. Any one have an idea?

Thanks Dale